收藏本站
Bulletin No. PAXCDS-C
Drawing No. LP0400
Released 2/02
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion-controls.com
MODEL PAXCDS -SETPOINT OUTPUT PLUG-IN OPTION CARDS
DESCRIPTION
This bulletin serves as a guide for the installation, configuration and
operation of PAX Setpoint cards. The setpoint cards are available as dual relay,
quad relay, quad sourcing transistor, or quad sinking transistor outputs. Only
one setpoint card can be installed at a time.
INSTALLING AN OPTION CARD
The PAX meter can be fitted with up to three option cards. The slot bays of
the option cards are dedicated to a particular card function. The option card
functions are: serial communications, analog output and setpoint output. Only
one card from each function category can be installed.
TOP VIEW
Caution : The option and main circuit cards contain static
sensitive components. Before handling the cards, discharge
static charges from your body by touching a grounded bare metal
object. Ideally, handle the cards at a static controlled clean
workstation. Also, only handle the cards by the edges. Dirt, oil or
other contaminants that may contact the cards can adversely
affect circuit operation.
Warning : Exposed line voltage exists on the circuit boards.
Remove all power to the meter AND load circuits before
accessing the unit.
1. Remove the main assembly from the rear of the case. Squeeze the finger
holds on the rear cover, or use a small screwdriver to depress the side
latches to release it from the case. It is not necessary to separate the rear
cover from the main circuit card.
2. Locate the option card connector for the type of option card to be
installed. Hold the unit by the rear connector, not the display board, when
installing an option card.
3. Install the option card by aligning the option card connector with the slot
in the rear cover. The cards are keyed by position with different main
board connector locations. Be sure the connector is fully engaged and the
tab on the option card rests in the alignment slot on the display board.
4. Slide the assembly back into the case. Be sure the rear cover latches fully
into the case.
5. Apply the option card label to the bottom side of the meter. Do not cover
the vents on the top surface of the meter. The surface of the case must
be clean for the label to adhere properly. Apply the label to the area
designated by the large case label.
PAX REAR TERMINAL CONNECTIONS
1
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
PB134024 RELAY GEN PURPOSE SPST 10A 24V
PBA150 RELAY OPTOMOS 250MA DPST 8-DIP
PBB150 RELAY OPTOMOS 250MA DPST-NC 8DIP
PBC-080A3Q RELAY CONTACTOR 3PST 80A 380V
PBR50BLYE24V LIGHT BLINKING MODULE YELLOW
PCBSED SOCKET PC-MNT 12A 250V ED SER
PCE-112D1H,000 RELAY GEN PURPOSE SPDT 10A 12V
PCE-112D1MH,000 RELAY GEN PURPOSE SPST 10A 12V
相关代理商/技术参数
PAXCDS20 制造商:Red Lion Controls 功能描述:Card, Plug-In; + 0.01% 10 ms; Quad Setpoint Relay Output Card; PAX Series 制造商:Red Lion 功能描述:Bulk 制造商:Red Lion Controls 功能描述:QUAD RELAY CARD 制造商:Red Lion Controls 功能描述:OUTPUT MODULE RELAY 制造商:Red Lion Controls 功能描述:OUTPUT MODULE, RELAY 制造商:Red Lion Controls 功能描述:QUAD SETPOINT RELAY OUTPUT INTERFACE CARD; Accessory Type:Quad Setpoint Relay Output Interface Card; For Use With:Red Lion PAX Digital Input Panel Meters ;RoHS Compliant: Yes
PAXCDS30 制造商:Red Lion Controls 功能描述:Panel Meter, OptionCard for Dual Rate Totalizer, Quad Setpoint Sinking Output 制造商:Red Lion Controls 功能描述:QUAD NPN-OC CARD
PAXCDS40 制造商:Red Lion Controls 功能描述:Card, Plug-In; + 0.01% 10 ms; PAX Series 制造商:Red Lion Controls 功能描述:QUAD PNP-OC CARD 制造商:Red Lion Controls 功能描述:SOURCING OPEN COLLECTOR OUTPUT INTERFACE CARD; Accessory Type:Quad Setpoint Sourcing Open Collector Output Interface Card; For Use With:Red Lion PAX Digital Input Panel Meters ;RoHS Compliant: NA
PAXCK000 制造商:Red Lion Controls 功能描述:Timer; Red, Sunlight Readable; 0.56 in.; 18 VA; 85 to 250 VAC; 2300 V (RMS) 制造商:Red Lion Controls 功能描述:CLOCK/TIMER FIELD UPGRADEABLE 制造商:Red Lion Controls 功能描述:DIGITAL MULTIFUNCTION TIMER RTC 制造商:Red Lion Controls 功能描述:DIGITAL MULTIFUNCTION TIMER, RTC 制造商:Red Lion Controls 功能描述:DIGITAL MULTIFUNCTION TIMER; Supply Voltage Range:85V AC to 250V AC; Time Min:0.001s; Time Max:1h; Power Consumption:18VA; Panel Cutout Height:45mm; Panel Cutout Width:92mm; Character Size:0.56"; Display Font Color:Red ;RoHS Compliant: NA 制造商:Red Lion Controls 功能描述:DIGITAL MULTIFUNCTION TIMER, RTC; Supply Voltage Range:85V AC to 250V AC; Time Min:0.001s; Time Max:1h; Power Consumption:18VA; Panel Cutout Height:45mm; Panel Cutout Width:92mm; SVHC:No SVHC (19-Dec-2012); Count Speed Max:50Hz; ;RoHS Compliant: Yes
PAXCK010 制造商:Red Lion Controls 功能描述:CLOCK/TIMER, FIELD UPGRADEABLE RED DC 制造商:Red Lion Controls 功能描述:DC CLOCK/TIMER FIELD 制造商:Red Lion Controls 功能描述:DIGITAL MULTIFUNCTION TIMER RTC 制造商:Red Lion Controls 功能描述:DIGITAL MULTIFUNCTION TIMER, RTC 制造商:Red Lion Controls 功能描述:DIGITAL MULTIFUNCTION TIMER; Supply Voltage Range:11V DC to 36V DC; Time Min:0.001s; Time Max:1h; Power Consumption:14W; Panel Cutout Height:45mm; Panel Cutout Width:92mm; Character Size:0.56"; Display Font Color:Red ;RoHS Compliant: NA
PAXCK100 制造商:Red Lion Controls 功能描述:CLOCK/TIMER, FIELD UPGRADEABLE GREEN 制造商:Red Lion Controls 功能描述:CLOCK/TIMER FIELD UPGRADEABLE
PAXCK110 制造商:Red Lion Controls 功能描述:CLOCK/TIMER, FIELD UPGRADEABLE GRN DC 制造商:Red Lion Controls 功能描述:DC CLOCK/TIMER FIELD UPGRADEABLE
PAXD0000 制造商:Red Lion Controls 功能描述:Panel Meter; Panel Meter Type; 85 to 250 VAC; CE Marked, cUL Recognized 制造商:Red Lion Controls 功能描述:UNIVERSAL DC INPUT FIELD 制造商:Red Lion Controls 功能描述:Multifunction Meter 制造商:Red Lion Controls 功能描述:MULTIFUNCTION METER; No. of Digits / Alpha:5; Meter Function:DC Amps / DC Volts / Resistance; Meter Range:-200A to +2A / -200mV to +300V / 100ohm to 10kohm; Digit Height:14.2mm; Panel Cutout Height:44.96mm; Power Consumption:15VA ;RoHS Compliant: Yes